Common Causes of A Flat Truck Tyre | Steps For DIY Repair

 At some point in time, you’re going to have a flat tyre in any vehicle you drive. If you own a fleet or drive a truck, you’re twice as likely to have that problem. We don't need to tell you how tedious it is to change your tyre while on the road, especially when dealing with truck tyres Sydney, Australia.

While many people think there's no trick to preventing flat tyres, the fact remains, there are things you could try out to minimize the risk of having one in the first place. You just need to know what they are.

However, if push comes to shove and you need quick tips to fix a flat truck tyre, we’re here for you. In this blog post, we’re helping you with a list of DIY repair steps you can follow to fix a flat truck tyre in no time. 

First of all, let’s help you in identifying the cause of that flat tyre. Here are the top seven causal agents of a flat truck tyre.

Vandalism

Vandalism is the most likely cause of a leaky tyre. If someone’s forcefully punctured your truck tyre sometime in the past, you’ll need to have that tyre changed to your spare even if you don’t notice any air leaks of some sort.  

On the lookout for crucial steps for changing your truck tyre? Don’t worry. Just keep reading, you’ll get to that in no time.

An over-inflated truck tyre

Take care not to over-inflate your tyres when pumping them. If you do, your steering wheel becomes imbalanced and you don’t need this on a good day.

To avoid the potential hazards that come with driving on over-inflated tyres, least of which is an accident, pay very close attention to the required pressure for your truck tyres Penrith. Doing so may save your life and that of your employees. 

Sharp objects

More flat tyres happen due to a puncture than any other causal agent. This, however, doesn’t mean you can’t do anything to avoid it. Next time you drive, make sure you avoid driving on debris on the road. At the very least, you can prevent a flat tyre most of the time.

Bad roads

Seeing as the highways of Australia are pretty top-notch, the chances of your truck tyre going flat are pretty slim.

However, this doesn't mean it can't happen. Especially when driving in rural areas. What to do? try as much as possible to avoid potholes where you can. It’s not easy, but it’ll help your truck tyres a lot if you do so.

Worn-out truck tyre

Logically, truck tyres are more likely to face this problem seeing as they’re used to carry larger merchandise and do more of the heavy-duty stuff. 

It’s crucial to check your truck tyres before taking it for a long drive. If you’re looking to deliver merchandise to the next town, then you’d be doing your drivers a favour by making routine tyre checks before the D-day.

Here are some observations that could spell out a worn-out tyre.

• A deeply scuffed tyre.

• Uneven wear on one side of the tyre.

• Mis-alignment of the truck tyres.

Damage to the valve system

The valve of your truck tyre is that small protrusion you unscrew anytime you need to inflate your tyres. If you’ve tried checking for the above steps and couldn’t pinpoint the problem, then you might need to check your valve. 

If that’s the problem, then you should get you a new one ASAP. Fixing it shouldn’t be a problem for you. However, it is delicate work, if you aren’t careful enough, things could go south real fast. 

Inevitable damages

In some cases, flat tyres are unavoidable even if you pay attention to them well. Chances are, your truck tyres Penrith will get flat. If you’re on a drive and you get a flat tyre, don’t slam on the brakes or your truck might topple over. Instead, slowly hit the brakes allowing it to slow down and steer to the side of the road. 

Only then can you attempt any repairs by yourself. You could call a professional in your locale to help you with the job. That's if you can't handle all the dirty work.

What happens when all goes south and you need to change your truck tyres? You give up? Of course not. Just make sure you have these tools.

• AJack.

• A Lug wrench.

• A Spare tyre.

• A flashlight.

• Rain poncho

• Gloves

• Wheel wedges

• A 2 * 6 wood for securing the jack.

And follow these steps:

• Navigate your truck to a safe location (the side of the road is a suitable place). Try to find a levelled ground. This way, your vehicle doesn’t roll-off.

• Turn on your hazard lights. Turning them on tells other drivers the situation you’re in to avoid a collision.

• Use the parking brake when during the whole process. 

• Use the wheel wedges well. Wheel wedges make sure your tyres don’t roll off when changing them.

• Remove the hubcap (if any).

• Loosen the lug nuts. You can do this using the lug wrench.

• Place the jack under your truck.

• Raise the truck.

• Unscrew the lug nuts you loosened previously.

• Remove the flat tyre.

• Mount the spare tyre on the lug bolts.

• Secure the spare tyre by tightening the lug nuts.

• Lower the vehicle.

• Tighten the nuts again.

• Release the jack gently.

• Replace the hubcap.

• Put the tools back to their places.

There you have it, seven causal agents of a flat truck tyre Sydney. Remember, you aren’t dealing with car tyres here. If changing your tyres is a lot of work for you, it’s better to leave things to the pros. If you need them in Sydney, Australia, give us a call.

Disclaimer:- This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.